Thermal spraying Product List and Ranking from 75 Manufacturers, Suppliers and Companies

Casting welding repair "Tōei Gikō" [Emergency response available, cost-saving options available]

Introducing the company "Tōei Gikō Co., Ltd." with outstanding technology and achievements in casting!

We would like to introduce "Tōei Gikō Co., Ltd.", a repair service provider for castings such as pump and blower casings and impellers that we handle. In addition to castings, the company can also work with stainless steel. They can perform emergency repairs on cracks and other issues that cannot be fixed by on-site contractors. Particularly for castings (FC and FCD), they possess outstanding technology and a proven track record. 【Special Coating】 ■ JET Coating (HVOF) - Purpose of application: To prevent sulfuric acid corrosion of metals and enhance the durability of parts. - HVOF Diamond Jet Thermal Spray Process: A new thermal spraying method that uses a large volume of high-pressure assist gas and combustible gas fuel to perform high-speed flame spraying. ■ Arc Spraying - Purpose of application: To regenerate through metal buildup and enhance durability against sulfuric acid corrosion. - Arc Spraying Process: Wire or powder is fed according to the melting rate, and compressed air is used to atomize the molten metal, which is then continuously sprayed onto the substrate to form a coating. *For more details, please refer to the PDF document or feel free to contact us.

Company：三興商事
Price：Other

Welding Machine
Repair Agent
Calibration and repair
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Various types of ceramic thermal spraying (metal, cermet, film formation)

We accept comprehensive contracts from parts processing to film formation, and we also accept supplied materials! We can handle a wide variety of film types, including ceramics, metals, and cermets!

I want to introduce high-performance materials... However, they are too expensive to consider. In such cases, thermal spraying is the solution! Thermal spraying can accommodate a wide range of coatings, including ceramics, metals, and cermets! By applying thermal spraying and coating to the parts currently in use, similar effects to high-performance materials can be expected. For example, if you want to improve "heat resistance," "wear resistance," "release properties," etc... If you have such concerns, please consider thermal spraying and coating, and feel free to consult with us. With our extensive experience in thermal spraying and coating, we will propose the most suitable coating type for you.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Processing Contract
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Use Case] Repairing with buildup on two-vertex and three-vertex angles.

Instantly melt only the meat materials, alloy and deposit them onto the substrate! Welding is possible even in difficult corners while minimizing shrinkage!

We would like to introduce examples of applications for the laser cladding and welding equipment "Smart Laser" and "TL Series." This equipment instantly melts only the cladding material, allowing it to alloy and deposit onto the base material with extremely low heat input, enabling high-quality cladding and welding without adverse effects from heat (such as distortion and secondary shrinkage). Please feel free to contact us when you need assistance. 【Related Products】 ■ Portable Fiber Laser Cladding and Welding Equipment "Smart Laser" ■ YAG Laser Cladding and Welding Equipment "TL Series" *For more details, please refer to the PDF document or feel free to contact us.

Company：テクノコート
Price：Other

Other machine tools
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Use Case] Battery case top; welding of mobile phone parts.

It is possible to build up and weld various materials! Surface treatments such as texturing after buildup and chrome plating can also be done.

We would like to introduce examples of applications for the laser cladding and welding equipment "Smart Laser" and "TL Series." It is capable of cladding and welding on most steel materials, aluminum, titanium, copper alloys, stainless steel, gold, and also between dissimilar metals. Surface treatments such as texturing and chrome plating can be performed after cladding. 【Case Overview】 ■ Welding of battery case top - Material: Al Aluminum - Plate thickness: 0.5mm ■ Welding of mobile phone components - Material: Stainless steel *For more details, please refer to the PDF document or feel free to contact us.

Company：テクノコート
Price：Other

Other machine tools
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Use Case] Joining Pipe Components

Introducing examples of cladding and welding on various materials without the need for preheating or post-heating!

We would like to introduce application examples of the laser cladding and welding equipment "Smart Laser" and "TL Series." It is capable of cladding and welding on most steel materials, aluminum, titanium, copper alloys, stainless steel, and gold, as well as cladding and welding between different metals. Additionally, preheating and post-heating of the workpiece are not required. 【Joining Examples】 ■ Pipe Joining 1 - Material: Cu - Size: φ6mm / Thickness 0.5mm ■ Pipe Joining 2 - Material: Ti - Size: φ5mm / Thickness 0.5mm *For more details, please refer to the PDF materials or feel free to contact us.

Company：テクノコート
Price：Other

Other machine tools
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Functional Products - Ceramic Thermal Spraying

Cost performance can be pursued.

Through the collaboration between the thermal spraying equipment manufacturer "Aero Plasma" and the ceramics materials technology of Japan Ceratec, we have established a ceramic thermal spraying technology with infinite possibilities, including ultra-dense, high voltage resistance, and plasma resistance characteristics.

Company：NTKセラテック
Price：Other

Ceramics
Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precision Restoration Repair Partner - Hosokawa Seiki Co., Ltd. - Company Profile

To reduce downtime due to mechanical failures, we also offer on-site repairs and service trips.

We are a specialized repair company skilled in restoring the precision of production equipment machinery (fitting work).

Company：細川精機川崎営業所
Price：Other

Other machine tools
Other services
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for HVOF thermal spraying on resin

Solving various issues such as wear, weight reduction, and peeling! We also propose ultra-hard thermal spraying for resins.

Our company is capable of integrated production from HVOF thermal spraying to grinding and super finishing. In cases where resin is used for product weight reduction, various problems can arise. In such situations, please consider our "HVOF thermal spraying." It can compensate for the weaknesses of resin. "Sliding parts are wearing out" "Having trouble with peeling from hard chrome plating" "I want to apply a high-hardness coating" "Heavy and costly due to being made of cemented carbide" These issues can be resolved with HVOF thermal spraying (WC-Co coating)! 【Features】 ■ Dense and hard coating: Improved wear resistance (porosity less than 1%) ■ Hardness higher than hard chrome plating (over Hv1100), compliant with RoHS ■ Change to a lighter base material for weight reduction and cost savings with a hard coating ■ Can add chemical resistance for items used in chemical environments ■ Spray coating available for non-metal materials as well ■ Can achieve thick coatings (over 100μm) *For more details, please refer to the PDF document or feel free to contact us.

Company：新中央工業
Price：Other

Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precision cleaning and ceramic spraying for shields and protective plates.

High achievements in the hard disk industry! We restore used parts to like-new condition.

Our precision cleaning and ceramic spraying for shields and protective plates rejuvenate used precision machine parts to like-new condition using high-purity technology and analytical techniques. In blast cleaning, we use white aluminum oxide with abrasives ranging from #24 to #320 to meet our customers' requests. In chemical cleaning, we utilize acidic and alkaline agents to remove contaminants without damaging the base material. For gas spraying, we employ oxygen and acetylene to spray aluminum powder, capable of handling both small and complex shapes. Arc spraying uses electric sparks to melt aluminum wire for spraying, allowing for changes in surface roughness. Plasma spraying utilizes plasma to spray aluminum powder, alumina, and other materials, preventing surface oxidation and enabling the spraying of a wide range of metals. For more details, please contact us or refer to our catalog.

Company：マツボー
Price：Other

Other cleaning machines
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

GEHRING / Cylinder Block Thermal Spray Pre-Laser Rough Machining Machine

Optimal for rough surface processing of thermal spray bores, laser rough surface processing machine.

Rough surface processing (laser roughening) is equipment that performs rough surface processing inside engine bores using lasers. This is done to enhance the adhesion between the base material and the thermal spray material. By creating a special profile shape on the inner surface of the bore with a laser, it not only generates a higher adhesion compared to conventional mechanical roughening but also allows for a shallower depth of the roughening profile. This not only reduces the cycle time for thermal spraying but also significantly decreases the amount of thermal spray material used. 【Features】 ■ By configuring the equipment in a two-axis structure, simultaneous processing of #1 bore and #3 bore, as well as #2 bore and #4 bore, is possible.

Company：シーケービー
Price：Other

Other machine tools
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

STURM / Cylinder Bore Thermal Spray Device

Instead of a liner, by thermal spraying steel wire or powder into the cylinder bore, we achieve durability, reduced number of parts, and weight reduction!

The German company Strum's cylinder bore thermal spraying device allows for the selection of either wire or powder as the thermal spray material. The specifications of the equipment also change depending on the thermal spray material used. A cylinder inspector made by STURM is installed in the machine, which records the surface roughness, coating defects, and surface characteristics of the cylinder before and after spraying. There is also an inline measurement device (independent or included with the wire thermal spraying process). Due to the narrow injection angle of the thermal spray material, a uniform thin layer can be welded onto the cylinder bore. 【Features】 Particles of wire or powder are sprayed onto the undercut areas formed by roughening and are melted onto the surface of the cylinder bore.

Company：シーケービー
Price：Other

Special Processing Machinery
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plasma spraying

◆◇◆ What is Plasma Spraying ◆◇◆ Plasma spraying is a process that uses a plasma jet generated by a plasma spray gun to heat and accelerate spray materials, bringing them to a molten or near-molten state before spraying them onto a substrate. The diagram illustrates the principle of a plasma spray gun. As shown in the diagram, when a voltage is applied between the cathode and anode, a direct current arc is generated. The working gas (such as argon) supplied from the rear becomes ionized, producing plasma. Then, the spray powder material is fed into the plasma flame using the working gas (such as argon), forming a spray coating.

Company：村田ボーリング技研
Price：Other

Processing Contract
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wire thermal spraying

Thermal spraying using wire-shaped various metals.

◆◇◆ What is Wire Thermal Spraying ◆◇◆ It is a thermal spraying method that uses wire-shaped thermal spray materials. To control the temperature of the substrate being sprayed to within 150°C, thermal distortion and degradation of the substrate do not occur. Wire thermal spraying is also called low-temperature buildup spraying and allows for thick buildup. There are "arc spraying" and "wire flame spraying" systems.

Company：村田ボーリング技研
Price：Other

Processing Contract
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Spray Processing Terminology Glossary【1】

Thermal Spraying Processing Glossary

● What is thermal spraying? Thermal spraying is a type of surface modification method that uses heat sources such as fuel-oxygen combustion and electrical energy to heat spraying materials, creating particles in a molten or near-molten state that are then sprayed onto a substrate to form a coating. Thermal spraying has many advantages compared to other surface modification methods (such as surface hardening, carburizing, nitriding, ion implantation, plating, vapor deposition, and build-up welding). ● What is gas thermal spraying? A general term for thermal spraying conducted using a combustion flame of oxygen and combustible gas. ● What is flame spraying? A process that uses a combustion flame of oxygen and combustible gas to heat and melt linear, powder, or rod-shaped thermal spraying materials, which are then sprayed onto a substrate to form a coating. Flame spraying includes wire flame spraying, powder flame spraying (self-fusing alloy spraying), high-velocity flame spraying (HVOF spraying), and rod flame spraying (low-cast spraying). ● Wire flame spraying Uses linear thermal spraying materials. ● Powder flame spraying (self-fusing alloy spraying) Uses powder thermal spraying materials. ● Rod flame spraying (low-cast spraying) Uses rod-shaped thermal spraying materials. ● High-velocity flame spraying (HVOF spraying) Ultra-high-speed thermal spraying that uses gas flame as the heat source.

Company：村田ボーリング技研
Price：Other

others
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Iron powder thermal spray surface treatment applications

Achieve long life and high performance by providing the product with corrosion resistance and wear resistance.

This is an introduction to the thermal spraying surface treatment applications of iron powder handled by Heganes Japan Co., Ltd.

Company：ヘガネスジャパン
Price：Other

Steel
Other metal materials
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rich lineup! "Powder for Metal Thermal Spraying"

Many materials such as nickel, cobalt, and iron! A must-see for those struggling with product corrosion resistance and wear resistance!

Our company offers a wide range of "metal thermal spray and overlay powder" based on nickel, cobalt, and iron. We provide various application methods such as "powder welding," which is ideal for rebuilding small mold components; "flame spraying," which allows for metal bonding with the base material through fusing treatment; "high-speed flame spraying," which forms a dense coating without heat input; and "plasma powder overlay," which is easy to automate for mass production. Additionally, "laser cladding" enables ideal film formation for both small and large products by adjusting output and irradiation shape. 【Examples of Applications】 ■ Laser Cladding ■ Flame Spraying ■ High-Speed Flame Spraying ■ Plasma Powder Overlay (PTA) *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：ヘガネスジャパン
Price：Other

Steel
Other metal materials
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heganes Japan "Metal Thermal Spray Powder" 【※Rich lineup!】

[Selection Guide & Catalog Giveaway] Many options including nickel, cobalt, and iron! A must-see for those struggling with product corrosion resistance and wear resistance!

At Heganes Japan, we manufacture and sell high-quality "thermal spray powders" based on nickel, cobalt, and iron. We offer a wide range of application methods, including "powder welding," suitable for rebuilding small mold components; "flame spraying," which allows for metal bonding with the base material through fusing treatment; "high-velocity flame spraying," which forms a dense coating without heat input; "plasma powder cladding," which is easy to automate for mass production; and "laser cladding," which enables ideal film formation for both small and large products by adjusting output and irradiation shape. 【New Product AMPERIT(R)543 WC-42CrC-16Ni】 This powder features a high nickel content of 16%, providing excellent ductility and low porosity. Its dense coating also offers good corrosion resistance, and with a coating density of 9.3g/m3, which is over 20% lower than the standard WC-CrC-Ni 73/20/7, it achieves excellent cost benefits. *For more details and selection of the new product AMPERIT(R)543 WC-42CrC-16Ni, please refer to the PDF available for download.

Company：ヘガネスジャパン
Price：Other

Steel
Other metal materials
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wear resistance, corrosion resistance, and reaction prevention [Coating solves these issues].

Supports the improvement of wear resistance of CFRP components and the prevention of oxidation and reactions in SiC components. Assists in achieving CO2 emission reduction and carbon neutrality.

<Do you have any of these concerns?> - Using CFRP but durability is lacking - Want to use expensive ceramic components for a longer time - Want to improve heating efficiency Our company adds new functions to various materials using thermal spraying, coating, and buildup techniques. Examples: Thermal spraying (coating) WC cermet or ceramics onto CFRP → Improves wear resistance and corrosion resistance Thermal spraying ceramics onto SiC components → Prevents oxidation and reactions, extends lifespan, improves radiative cooling of industrial furnaces Repairing roll shafts with thermal spraying → Restores dimensions and makes them reusable By reducing product weight through material changes, shortening firing times, and improving energy efficiency in power generation equipment, we contribute to reducing environmental impact, such as CO2 emissions and achieving carbon neutrality. 【Click here for the technical catalog list】 https://www.tocalo.co.jp/contact/download/?source=ipros We apologize for the inconvenience, but please view the catalog from the above page.

Company：トーカロ
Price：Other

Heating device
Surface treatment contract service
Other conveying machines
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally friendly surface treatment! "The Best Coating for Repairs" Thermal Spraying and Coating

We assist with "resource conservation and energy saving" through Tokaro's thermal spraying and surface treatment technology!

If you're looking for environmentally friendly surface treatment, thermal spraying, and coating, trust Tocalo. By applying surface treatment, it is possible to coat materials on the surface of components that are stronger and more durable than the base material. This contributes to resource conservation by extending the lifespan of equipment and parts and reducing the frequency of replacements. Not only is it environmentally friendly, but it also achieves cost reductions in new production due to the extended lifespan of components. For example, in repair applications, TLC (Laser Cladding) and TS-3013 are commonly used. By minimizing thermal impact, it allows for localized repairs of worn areas, enabling the reuse of components that would have otherwise been discarded due to the base material's quality or shape, instead of giving up on welding repairs. Optimal surface treatment technology for repairs: 'TS-3013' materials: https://tocalo-download.satori.site/tpr035-00?source=ipros 'TLC technology' materials: https://tocalo-download.satori.site/tpr016-00?source=ipros

Company：トーカロ
Price：Other

Heating device
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wear-resistant and molten metal-resistant "TD-VC"

Formation of ultra-hard thin films through diffusion penetration of carbides using salt bath treatment! - Surface treatment and coating technology -

▶ For surface treatment, thermal spraying, and coating, trust Tokaro! 【Overview】 We form an extremely hard coating using a salt bath treatment method, protecting the substrate from wear and seizure. With a high hardness coating exceeding HV2500, it demonstrates excellent wear resistance and outstanding resistance to molten aluminum. Since it is possible to form coatings on inner surfaces and in blind spots, it has been widely applied to molds and complex-shaped parts. 【Examples of Achievements】 Industry: Steel manufacturers Target: Masher rolls Proposal: Substrate + TD treatment Result: Replaced after 3 months ➡ Used for over 4 years *Please refer to the materials for details. 【Contents of the Materials】 ● Features: Main components, film thickness, hardness, etc. ● Coating hardness: Comparison with Cr plating, hardened steel, nitriding, PVD, etc. ● Wear resistance through coining processing ● Resistance to molten aluminum ● Comparison table with other treatments: Treatment temperature, substrate distortion, heat resistance, etc. ● Achievements - Steel industry - Mold industry - Resin industry - Pump industry

Company：トーカロ
Price：Other

Surface treatment contract service
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to examples of thermal spraying, coating, and surface treatment applications! [Case study materials are being offered]

There are various ways to use it! We contribute to improving production efficiency and extending the lifespan of components through surface treatment and coating technologies, starting with thermal spraying.

▶ Please leave surface treatment, thermal spraying, and coating to Tocalo! Surface treatment is widely used across various industries, from steel and semiconductors to the medical field. In this document, we provide a comprehensive overview of thermal spraying, other technologies, and proven applications! ＼ Recommended for the following people! ／ - Those considering surface treatment - Those looking for coatings that last longer - Those wishing for treatments with minimal thermal impact - Those considering adding high functionality and added value to products under development ―――― Content Overview ――― ● What is thermal spraying? ● Technologies held by our company ● Technologies other than thermal spraying ● Examples of surface treatment applications 【Download the catalog here】 https://tocalo-download.satori.site/tpr049-00?source=ipros

Company：トーカロ
Price：Other

Surface treatment contract service
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Superhard thermal spraying (wear-resistant, high hardness)

If you're dealing with sliding wear, please consider carbide thermal spraying first! - Introduction to surface treatment and coating technology -

▶ Please leave surface treatment, thermal spraying, and coating to Tocalo! WC-based cermet thermal spray coatings are excellent in wear resistance and corrosion resistance. A mirror finish is also possible, and there are numerous application records across various industries. <Contents of the materials> - Characteristics of hard coatings (hardness, coating composition, surface roughness, thickness, etc.) - Results of the Suga-type wear test: hard coating vs. SUS material, Cr plating, etc. - Wear tests assuming cylinder rods - CASS corrosion resistance test data: comparison with Cr plating - Usage records 【Download the materials here】 https://tocalo-download.satori.site/tpr002-00?source=ipros

Company：トーカロ
Price：Other

Surface treatment contract service
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For the long lifespan of pump parts! Solved with coating and thermal spraying technology.

Does it not last with plating? For such concerns, we also have specifications with a hardness of HV1000 or higher!

Are you struggling with corrosion from seawater and sulfuric acid, or wear of pump components due to sediment and slurry? We coat materials on the surface of components that are stronger and more durable than the base material, contributing to the longevity of pump parts and reducing the frequency of replacements. ▼▽ Coatings with Proven Results for Pump Components ▽ ▼ ■ For Repairs (Casing, Impeller, etc.) Recommended for those troubled by thermal distortion from weld buildup! [TLC] Low thermal distortion, low dilution, corrosion resistance [TS-3013] Low-temperature application, thick film repair ■ Corrosion Prevention For corrosion prevention against seawater, sulfuric acid, and molten metals! Protects the base material from corrosive liquids flowing through pumps and piping. [CDC-ZAC] Corrosion resistance, wear resistance [SUPER-ZAC] Corrosion resistance ■ Measures Against Sediment Wear and Slurry Erosion High-hardness WC cermet coating. Suitable for wear from sliding as well as wear caused by sediment and slurry! [Super Hard Thermal Spray] Wear resistance, resistance to sediment wear, etc. * Additionally, there is "T-4318," which is even more resistant to sediment wear. 【For a list of materials, click here】 https://www.tocalo.co.jp/contact/download/?source=ipros

Company：トーカロ
Price：Other

Other pumps
Thermal spraying

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Alumina Thermal Spraying on Semiconductor Manufacturing Equipment Parts

Improvement of Insulation Properties: Alumina Thermal Spraying on Semiconductor Manufacturing Equipment Parts

【Effect】Improved insulation and plasma resistance through alumina thermal spraying technology 【Challenge】 In semiconductor manufacturing equipment components, alumina thermal spraying technology has been used as a solution to prevent electrostatic damage; however, the challenges have been the need for high-purity coatings and quick delivery times. 【Solution】 Our alumina thermal spraying generates high-purity coatings and accommodates short delivery times. 【Our Strength】 Our plasma spraying equipment specializes in handling single items and prototypes. *There are also materials not available online. For more details, please download the PDF or feel free to contact us. *Case study materials can be downloaded from the catalog of I.C.S. case studies.

Company：アイ・シイ・エス
Price：Other

Other semiconductor manufacturing equipment
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Overview of Thermal Spraying Technology (with Examples)

We will code the desired features where necessary.

Thermal spraying is a technique that heats and accelerates various materials using energy, then sprays them onto a substrate to form a deposited film. Depending on the properties of the materials, various surface functions such as wear resistance, corrosion resistance, thermal insulation, electrical insulation, and adhesion can be imparted. As long as the material has a melting point, it can be thermally sprayed. Compared to other surface treatments, thermal spraying offers a wider range of substrate options, greater freedom in dimensional limitations, and a fast film formation rate.

Company：アイ・シイ・エス
Price：Other

Processing Contract
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

An Introductory Booklet on Thermal Spraying Understanding from the Basics

Introduction materials for thermal spraying technology giveaway.

Thermal spraying is a technique that involves heating and accelerating various materials using energy, then spraying them onto a substrate to form a volumetric film. Functionalities obtained through thermal spraying: - Wear resistance - Corrosion resistance - Heat resistance - Thermal insulation - Electrical insulation, etc. With ICIES, we offer: 1. Selection of materials according to your requirements 2. Proposals using the optimal process 3. Thorough quality control 4. Provision of high-quality thermal spray coatings.

Company：アイ・シイ・エス
Price：Other

Processing Contract
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rod-type frame thermal spraying (Locaid)

Thermal spraying onto pump sleeves! It has the characteristic of obtaining a relatively tough coating.

This is an introduction to Kōei Techno System's "Rod-Type Frame Thermal Spraying (Locaid)," which focuses on the repair, regeneration, extension of life, and maintenance of parts, aiming for high-quality parts, wear resistance, heat resistance, and anti-corrosion, similar to preventive medicine, through advanced research and development of machinery. Although it is a type of frame thermal spraying, it continuously supplies rod-shaped oxide ceramics processed to a diameter of 4.7 to 6.0 mm into an oxygen-acetylene flame for melting, followed by atomization and projection using compressed air to form a coating. Oxide ceramics such as aluminum oxide, zirconium oxide, and chromium oxide are sprayed. Since only fully melted materials are sprayed, the thermal spray coating does not contain unmelted particles, resulting in a high bonding strength between particles, which leads to a relatively tough coating. ● Thermal spraying on pump sleeves ⇒ Photo 1 *For more details, please download the catalog or contact us.

Company：光栄テクノシステム
Price：Other

Welding Machine
Processing Contract
Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powdered frame thermal spraying

Self-fluxing alloy thermal spraying onto rolls! The thermal spray gun is lightweight, easy to handle, and has relatively high spraying efficiency.

This is an introduction to Kōei Techno System's "Powder Flame Spraying," which focuses on the repair, regeneration, extension of life, and maintenance of parts, aiming for high-quality parts, wear resistance, heat resistance, and corrosion prevention, similar to preventive medicine, through advanced research and development of machinery. In this process, powder-like spraying materials are introduced into an oxygen-acetylene (or hydrogen, propane) flame, where they are melted and simultaneously accelerated by the combustion gas flow, causing the molten powder to collide with the substrate and form a coating. Almost all metals, alloys, and cermets can be sprayed, but it is commonly used for self-fusing alloy spraying, abradable spraying such as nickel-graphite, or plastic spraying, which typically undergo post-spraying re-melting treatment. The spraying gun is lightweight and easy to handle, has relatively high spraying efficiency, and produces low noise. ● Self-fusing alloy spraying on rolls ⇒ Photo 1 ● Re-melting treatment of rolls ⇒ Photo 2 *For more details, please download the catalog or contact us.

Company：光栄テクノシステム
Price：Other

Welding Machine
Processing Contract
Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plasma spraying

Thermal spraying on the sleeve, oil seal section of the screw shaft, and thermal spraying on the gland packing of the sleeve with flange.

This is an introduction to Kōei Techno System's "Plasma Spraying," which focuses on the repair, regeneration, extension of life, and maintenance of parts, aiming for high quality, wear resistance, heat resistance, and anti-corrosion of components, similar to preventive medicine, through advanced research and development of machinery. The plasma flame generated by the ionization of inert gas serves as the heat source. With ultra-high temperature and high-speed frames, it forms high-density, high-quality coatings on not only metals but also high melting point materials such as cermets and ceramics. Since the temperature of the plasma jet can be selected, there is great freedom in material selection, and it features high adhesion between the substrate and the sprayed coating. ● Spraying onto sleeves ⇒ Photo 1 ● Spraying onto the oil seal area of screw shafts ⇒ Photo 2 ● Spraying onto the gland packing of flanged sleeves ⇒ Photo 3 *For more details, please download the catalog or contact us.

Company：光栄テクノシステム
Price：Other

Welding Machine
Processing Contract
Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Velocity Oxygen Fuel (HVOF) Spraying

Thermal spraying onto screws and thermal spraying onto the inner diameter of casings! A high-hardness wear-resistant coating can be obtained.

This is an introduction to Kōei Techno System's "High-Speed Frame Thermal Spraying (HVOF Spraying)," which focuses on the repair, regeneration, prolongation, and maintenance of parts, aiming for high quality, wear resistance, heat resistance, and corrosion prevention, similar to preventive medicine, through advanced research and development of machinery. It is a type of gas thermal spraying that uses a super high-speed jet stream generated by combustion with high-pressure oxygen. Since the material collides with the substrate at high speed, it forms a coating with very high adhesion and density, resulting in a high-quality film. It is suitable for thermal spraying of cermets such as WC-Co, yielding a high-hardness wear-resistant coating. ● Thermal spraying on screws ⇒ Photo 1 ● Thermal spraying on casing inner diameters ⇒ Photo 2 *For more details, please download the catalog or contact us.

Company：光栄テクノシステム
Price：Other

Welding Machine
Processing Contract
Surface treatment contract service
Thermal spraying

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal spraying Product List and Ranking from 75 Manufacturers, Suppliers and Companies | IPROS GMS

Thermal spraying Manufacturer, Suppliers and Company Rankings

Thermal spraying Product ranking